Sichuan Juneng Filter Material Co.,ltd

Service call:13568949177

language
中国
韩国
韩国
韩国
韩国
韩国
1

1

2

2

3

3

海洋石油

海洋石油

四川聚能滤材有限公司
手术室

手术室

四川聚能滤材有限公司
Current Position:
Homepage
/
/
/
The difference between FFP2 and N95

The difference between FFP2 and N95

(Summary description)The protection provided depends on the type of device selected and its suitable location on the face. FFP1: minimum 80% aerosol filtration and maximum 25% (average 22%) leakage (earband cord is usually yellow); FFP2: minimum 94% aerosol filtration and maximum 11% (average 8%) leakage (Ear strap cord is usually white or blue); FFP3: minimum 99% aerosol filtration and maximum 5% (average 2%) leakage (ear strap cord is usually red).

The difference between FFP2 and N95

(Summary description)The protection provided depends on the type of device selected and its suitable location on the face. FFP1: minimum 80% aerosol filtration and maximum 25% (average 22%) leakage (earband cord is usually yellow); FFP2: minimum 94% aerosol filtration and maximum 11% (average 8%) leakage (Ear strap cord is usually white or blue); FFP3: minimum 99% aerosol filtration and maximum 5% (average 2%) leakage (ear strap cord is usually red).

Information

The protection provided depends on the type of device selected and its suitable location on the face. FFP1: minimum 80% aerosol filtration and maximum 25% (average 22%) leakage (earband cord is usually yellow); FFP2: minimum 94% aerosol filtration and maximum 11% (average 8%) leakage (Ear strap cord is usually white or blue); FFP3: minimum 99% aerosol filtration and maximum 5% (average 2%) leakage (ear strap cord is usually red).

good price and quality FFP2 The difference between FFP2 and N95:
Compared with FFP2, the N95 mask is one of the nine types of particulate protective masks. The protection level of N95 means that under the testing conditions specified by the NIOSH standard, the filtration efficiency of the mask filter material for non-oily particles (such as dust, acid mist, paint mist, microorganisms, etc.) reaches 95%.
The function of the FFP2 mask is to absorb harmful aerosols, including dust, fumes, mist droplets, poisonous gases, and poisonous vapors, through the filter material, preventing them from being inhaled. The lowest filtering effect of FFP2 is greater than 94%.
Therefore, the difference between FFP2 and n95 is not the same as the national standards implemented, and the protective effects are similar.
Through the above introduction and analysis of the difference between FFP2 and N95, hope it helps you.

Keyword:

How

How the Melt-blown fabric is constructed

The following paragraph of this article will introduce the related production process of Melt-blown fabric. The production process of Melt-blown fabric is mainly divided into three steps: melt extrusion, melt-blown process, and electret treatment. Specifically, Melt-blown fabric uses high-speed hot air flow to draw the extruded polymer melt through the spinneret holes of the die nozzle. From this, microfibers are formed and collected on a condensate screen or drum, and at the same time self-bond to become a Melt-blown fabric.
2023-03-23
Reasons

Reasons why Melt-blown fabric becomes brittle after production

1. If the aspect ratio of the spinneret of Melt-blown fabric is small, the holes are thick and short. After the polymer is sprayed, the fibers are thicker, the gaps are larger, and the water absorption is stronger for a long time , so the Melt-blown fabric is neither soft nor brittle.
2023-03-16
The

The features of BFE 99 masks

BFE in BFE 99 masks means bacterial filtration effect, which refers to the material's resistance to bacterial penetration. The reported results of BFE 99 masks are shown in percentage data, corresponding to the ability of the material to resist bacterial penetration. The higher the value, the better its filtration performance. 
2023-03-09
Chemical

Chemical absorbent pads manufacturers take you to understand absorbent pads

Chemical absorbent pads manufacturers tell you that as we all know, with the rapid development of the modern industrial chain, absorbent pads have been widely used in fresh vegetables and fruits. In the next paragraph of this article, chemical absorbent pads manufacturers will show you how the small absorbent pads are well known to everyone.
2023-03-02

Sichuan Juneng Filter Material Co.,ltd

ADD:No.399 West Section Of Fucheng Avenue,Hi-Tech Zone,ChengDu,China

蜀ICP备2020037266号-2

Official QR Code

Business Cooperation:

Tel:028-62083280

Phone:86-13484309500

Email:info@cnjnkj.com

Online customer service
Customer service hotline
400-6099-039 400-6099-039
Service time:
8:00 - 24:00
Customer service group:
在线客服

Key words:

Filter Material Adsorption Products Filter Adsorption Medical Accessories Medical Liquid Absorbent Pad Oil Absorbent Cotton Oil Absorbent Cord Graphene Respirator Mask Material PM2.5

©2021 Sichuan Juneng Filter Material Co.,ltd  Copyright  Powered by www.300.cn