Sichuan Juneng Filter Material Co.,ltd

Service call:13568949177

language
中国
韩国
韩国
韩国
韩国
韩国
1

1

2

2

3

3

海洋石油

海洋石油

四川聚能滤材有限公司
手术室

手术室

四川聚能滤材有限公司
Current Position:
Homepage
/
/
/
/
PFE99 Melt-blown Fabric manufacturers tell you what Melt-blown Fabric is

PFE99 Melt-blown Fabric manufacturers tell you what Melt-blown Fabric is

(Summary description)PFE99 Melt-blown Fabric means that the melt blown fabric can filter 99% of non-oily particles. Melt-blown Fabric is a filter material with polypropylene as the main raw material. The fiber diameter can reach 1 to 5 microns.

PFE99 Melt-blown Fabric manufacturers tell you what Melt-blown Fabric is

(Summary description)PFE99 Melt-blown Fabric means that the melt blown fabric can filter 99% of non-oily particles. Melt-blown Fabric is a filter material with polypropylene as the main raw material. The fiber diameter can reach 1 to 5 microns.

Information

PFE99 Melt-blown Fabric means that the melt blown fabric can filter 99% of non-oily particles. Melt-blown Fabric is a filter material with polypropylene as the main raw material. The fiber diameter can reach 1 to 5 microns. These ultra-fine fibers with unique capillary structure increase the number and surface area of ​​fibers per unit area, so that Melt-blown Fabric has good filterability, shielding, heat insulation and oil absorption. , Melt-blown Fabric can be used in the fields of air, liquid filter materials, isolation materials, absorption materials, mask materials, thermal insulation materials and wipe cloths.

PFE99 Melt-blown Fabric

Melt-blown Fabric is the core material of masks. Medical masks and N95 masks are composed of a spunbond layer, a meltblown layer, and a spunbond layer. The spunbond layer and the meltblown layer are all made of polypropylene PP material. In large, medium and small medical institutions, in disaster-stricken areas affected by earthquakes and floods, and in the season of high incidence of SARS, avian influenza and viruses, Melt-blown Fabric plays an irreplaceable role with its strong filtration performance.

PFE99 Melt-blown Fabric can be used for:

(1) Medical and health cloths: surgical gowns, protective clothing, disinfection wraps, masks, diapers, women’s sanitary napkins, etc.;
(2) Home decoration cloth: wall cloth, table cloth, bed sheet, bedspread, etc.;
(3) Garment cloth: lining, adhesive lining, wadding, shaped cotton, various synthetic leather base cloth, etc.;
(4) Industrial cloth: filter material, insulating material, cement packaging bag, geotextile, covering cloth, etc.;
(5) Agricultural cloth: crop protection cloth, seedling raising cloth, irrigation cloth, thermal insulation curtain, etc.;
(6) Others: space cotton, thermal insulation materials, linoleum, cigarette filters, tea bags, etc.

Melt-blown Fabric filter material is made of polypropylene microfibers randomly distributed and dipped together. The appearance is white, flat and soft. The fiber fineness of the material is 0.5-1.0μm. The random distribution of fibers provides more thermal adhesion between the fibers. Therefore, the melt blown gas filter material has a larger specific surface area and a higher porosity (≥75%). After high-pressure electret filtration efficiency, the product has the characteristics of low resistance, high efficiency and high dust capacity.

Keyword:

How

How the Melt-blown fabric is constructed

The following paragraph of this article will introduce the related production process of Melt-blown fabric. The production process of Melt-blown fabric is mainly divided into three steps: melt extrusion, melt-blown process, and electret treatment. Specifically, Melt-blown fabric uses high-speed hot air flow to draw the extruded polymer melt through the spinneret holes of the die nozzle. From this, microfibers are formed and collected on a condensate screen or drum, and at the same time self-bond to become a Melt-blown fabric.
2023-03-23
Reasons

Reasons why Melt-blown fabric becomes brittle after production

1. If the aspect ratio of the spinneret of Melt-blown fabric is small, the holes are thick and short. After the polymer is sprayed, the fibers are thicker, the gaps are larger, and the water absorption is stronger for a long time , so the Melt-blown fabric is neither soft nor brittle.
2023-03-16
The

The features of BFE 99 masks

BFE in BFE 99 masks means bacterial filtration effect, which refers to the material's resistance to bacterial penetration. The reported results of BFE 99 masks are shown in percentage data, corresponding to the ability of the material to resist bacterial penetration. The higher the value, the better its filtration performance. 
2023-03-09
Chemical

Chemical absorbent pads manufacturers take you to understand absorbent pads

Chemical absorbent pads manufacturers tell you that as we all know, with the rapid development of the modern industrial chain, absorbent pads have been widely used in fresh vegetables and fruits. In the next paragraph of this article, chemical absorbent pads manufacturers will show you how the small absorbent pads are well known to everyone.
2023-03-02

Sichuan Juneng Filter Material Co.,ltd

ADD:No.399 West Section Of Fucheng Avenue,Hi-Tech Zone,ChengDu,China

蜀ICP备2020037266号-2

Official QR Code

Business Cooperation:

Tel:028-62083280

Phone:86-13484309500

Email:info@cnjnkj.com

Online customer service
Customer service hotline
400-6099-039 400-6099-039
Service time:
8:00 - 24:00
Customer service group:
在线客服

Key words:

Filter Material Adsorption Products Filter Adsorption Medical Accessories Medical Liquid Absorbent Pad Oil Absorbent Cotton Oil Absorbent Cord Graphene Respirator Mask Material PM2.5

©2021 Sichuan Juneng Filter Material Co.,ltd  Copyright  Powered by www.300.cn