Sichuan Juneng Filter Material Co.,ltd

Service call:13568949177

language
中国
韩国
韩国
韩国
韩国
韩国
1

1

2

2

3

3

海洋石油

海洋石油

四川聚能滤材有限公司
手术室

手术室

四川聚能滤材有限公司
Current Position:
Homepage
/
/
/
/
How to achieve the filtration efficiency of quality PFE99 melt blown cloth

How to achieve the filtration efficiency of quality PFE99 melt blown cloth

(Summary description)Quality PFE99 melt blown cloth chooses permanent electret masterbatch

How to achieve the filtration efficiency of quality PFE99 melt blown cloth

(Summary description)Quality PFE99 melt blown cloth chooses permanent electret masterbatch

Information

1.Quality PFE99 melt blown cloth chooses permanent electret masterbatch

quality PFE99

Electret means charging. The electret quality PFE99 meltblown cloth reaches the 95+ level at first, but the filter effect drops after a few days of exposure, mainly because the electrostatic field is extremely unstable and the charge attenuation causes the filter effect to attenuate.
The electret masterbatch produced by the gas-silicon method has high efficiency and good durability. It basically belongs to permanent electricity storage, is easy to disperse, is non-toxic and tasteless, and can pass FDA certification. It seems that it has more advantages on the whole. This is because the electrostatic effect of these electret materials due to the electret greatly improves the electrostatic adsorption capacity of the material, and the particles will be strongly adsorbed when they pass near the electret fiber.

2. The quality PFE99 melt blown cloth should be packaged in time to avoid moisture regain
The environmental humidity has an impact on the generation and loss of static electricity. The moisture in the air and the charge of the melt-blown cloth will be converted into negative ions, and the loss of charge will affect the filtration efficiency.
The temperature and humidity in the workshop should be monitored at all times, and corresponding equipment should be added to keep the temperature and humidity in the workshop within a certain range.
The quality PFE99 melt blown cloth should be packaged in time after it is produced, preferably in vacuum packaging, and stored in a dry place, not in contact with the outside moist air. Avoid regaining moisture and staining.
In addition, pay special attention to the fact that melt blown cloth produced by different machines should not be put together, as they will affect each other and the charge will be neutralized.

3. Electret equipment should use positive charge
Dust, bacteria, and viruses in the air are attached to the particles and are mainly negatively charged. The quality PFE99 meltblown cloth is positively charged and easily adsorbs these negatively charged particles.
Electret equipment should use positive charge, not negative charge. Because the cloth has a positive charge, it can absorb the negative charge in the air. The quality PFE99 meltblown cloth is in contact with the skin, and the negative charge is more easily consumed. If it is positively charged, it will wear off more slowly.
 

Keyword:

The

The manufacturing process of oil absorbent pads  

Oil absorbent pads are a class of fibers and non-woven fabrics made of inert polypropylene melt-blown that have been specially treated to precisely absorb and retain liquids. The absorbent products of oil absorbent pads are all wrapped in polypropylene fibers or non-woven fabrics sewn with surface-active treatment agents.
2023-04-20
Introduction

Introduction of classification of oil absorbent pads

Oil-absorbing cotton products are usually in the form of oil absorbent pads (oil-absorbing sheets), oil-absorbing strips, oil-absorbing rolls, oil-absorbing pillows, and oil-absorbing fences. Oil absorbent pads, such as oil absorbent pads, are suitable for leakage treatment in a small area.
2023-04-13
Features

Features of Melt-blown fabric

Melt-blown fabric filter material is randomly distributed and bonded together by polypropylene microfibers. The appearance is white, flat, and soft. The material fiber fineness is 0.5-1.0μm. The random distribution of the fibers of the Melt-blown fabric provides more opportunities for thermal bonding between the fibers.
2023-04-06
Application

Application field of Melt-blown fabric

Scope of application of Melt-blown fabric (1) Melt-blown fabric can be used for medical and sanitary cloths: surgical gowns, protective clothing, sterile wraps, masks, diapers, women's sanitary napkins, etc.
2023-03-30

Sichuan Juneng Filter Material Co.,ltd

ADD:No.399 West Section Of Fucheng Avenue,Hi-Tech Zone,ChengDu,China

蜀ICP备2020037266号-2

Official QR Code

Business Cooperation:

Tel:028-62083280

Phone:86-13484309500

Email:info@cnjnkj.com

Online customer service
Customer service hotline
400-6099-039 400-6099-039
Service time:
8:00 - 24:00
Customer service group:
在线客服

Key words:

Filter Material Adsorption Products Filter Adsorption Medical Accessories Medical Liquid Absorbent Pad Oil Absorbent Cotton Oil Absorbent Cord Graphene Respirator Mask Material PM2.5

©2021 Sichuan Juneng Filter Material Co.,ltd  Copyright  Powered by www.300.cn